BS-115 CANOPY ASSEMBLY

Novotech has provided to develop Blackshape BS115 CANOPY ASSEMBLY, in relation to the identification of the applicable reference specification. It has also performed FEM static analysis in order to size and verify the structural strength of the rollbar, verify the structural strength of the canopy transparent and canopy frame. Novotech has simulated the mechanism of…

SAIA

Within the SAIA “Strutture Alari Innovative Aeronautiche” Project, (Program Contract Apulia Region), NOVOTECH has provided a specific contribute to wing design and sizing through the studies for the development of the NGTP (New Generation Turboprop) with highly innovative technologies. All this, in order to seek competitive advantages from both the product point of view and…

LAMITECH

The scope of LAMI – TECH Research Project (a partnership of Novotech with Leonardo – Aircraft) was to investigate and manufacturing innovative configuration and processing of CFRP multi-layer materials using Automated Fiber Placement (AFP) process capabilities available at Novotech Plant in Avetrana. Several test trials involving both flat and double curvature panels, made of Thermoset…

K4A – LANDING GEAR

Within the Project “K4A Helicopter KA-2HT”, NOVOTECH has provided the Design and Simulation Drop Testing on Landing Gear Skid, in particular developing the Static Analysis with MSC NASTRAN/PATRAN and the Dynamic one with MSC Adams. In particular, NOVOTECH has also simulated the Drop Test of the KA-2HT by means of Multi-Body Dynamic Analysis with MSC…

GROUND VIBRATION TEST (GVT) ON VIATOR AP600

NOVOTECH completed a GVT survey on the Vulcanair A – Viator AP600 Aircraft in order to identify its structural dynamic characteristics, and to demonstrate the aircraft’s conformity with the EASA CS-23 norms par. 23.629 “Flutter”. The modal parameters (natural frequencies, damping and mode-shapes) were determined for both stick-free and stick-fixed conditions. NOVOTECH proceeded to test…

GRIE.C.AM.

This Project is related to the Italian nuclear decommissioning of the power plant site of Garigliano (ITALY) managed by Sogin, the Italian State-owned company responsible. NOVOTECH, by subcontract of the GRIE.C.AM Company, has performed these main different activities: a) Statistical analysis of historical wind data recorded by the wind measurement station; b) Definition of FE Model…

SFIDA

Within PON SFIDA Project, NOVOTECH performed several activities as follows: • Define and evaluate an optimized tone noise/vibration control measures, applied to the cabin of the Alenia Aermacchi NTP Regional A/C. • Develop a passive device (Dynamic Vibration Absorber – DVA) to reduce the fuselage fundamental vibration frequency. Design, manufacture and test in laboratory about…

RTM (RESIN TRANSFER MOULDING) PROCESS

Novotech has provided, through Global Industries Scarl and in collaboration with FoxBit S.r.l, engineering services to the Piaggio Aero Industries S.p.a. on P-1XX Programme. During this time our engineers have worked on the preliminary design of CFRP structural components, also performing FEM Analysis relatively to linear, non-linear and instability calculations. The aim of this study…

SCAVIR

Starting from results obtained within SFIDA Project, the SCAVIR (Advanced Configurations Studies for an Innovative Regional Aircraft) activities were still aimed to improve the comfort level into the Regional aircraft cabin through the control of the propeller tonal noise and related vibrations generated by the propeller blades rotation. For these activities have been investigated Innovative…

BOMBARDIER G-7000

BOMBARDIER G-7000: Evaluation of the A/C response to vertical tuned discrete gust and continuous turbulence in compliance EASA CS-25 NOVOTECH has been involved as sub-contractor of DEMA Spa in the analysis, calculation and preparation to the Certification in FAR 25 of the Bombardier Global 7000.
Using a dynamic model of the aircraft, provided by Bombardier, NOVOTECH…

MDCD – Control Board

With the support of our customer SICAMB SpA, , NOVOTECH is currently providing the design and the implementation of a Control Board unit , finalized to the functional test of the Main Deck Cargo Door (MDCD) of the A320/321 P2F. This Control Board will be used in the Functional Testing and Acceptance Test. In particular,…

HELICOPTER STRUCTURAL DESIGN AND ANALISYS

Novotech provides engineering services to Leonardo Helicopter in their plant of Brindisi from more than 15 years. During this time our engineers worked on many programs (AW109 FP, AW139, AW169, EH101, A109 COMBACT, A109 LUH, AW109 TREKKER), mainly performing FEM Analysis on Metal-CFRP structures relatively to linear, non-linear, fatigue and dynamic calculations, internal noise (ATR),…